We are replacing a Kent Tile Fire, with an Enviro Bayview Pellet Fire. In this case, we're going to move the Pellet Fire back, to allow more space in the room.
 |
| We have already removed the Kent Tile Fire & the liner that goes through the ceiling, this is the hole that is left behind. |
 |
| Cleaning up hearth, ready for Pellet Fire. |
 |
| We are moving the Pellet fire back towards the wall, so a new hole has been cut, & a thimble installed. |
 |
| Enviro EF3 Bayview Pellet Fire. |
 |
| New & old holes. |
 |
| I have made a new ceiling panel, to cover over the old hole. |
 |
| Enviro EF3 Bayview Pellet Fire lifted into position. |
 |
| Flue in position, before flashing. |
 |
| Soaker flashing to cover over old hole & dectite fitted. |
Once we have completed the install, we load the fire with wood pellets & run up to temperature. We then set the air intake, using
a magnihelic gauge, to get the right amount of vacuum.
Enviro Pellet Fire Parts
Thanks for this. I really like what you've posted here and wish you the best of luck with this blog and thanks for sharing. Tile Service Sydney
ReplyDelete