Tuesday, January 29, 2013

Sara Pellet Fire Install.

This install was a little tricky, but we pulled it off!
Installation of the base into the purpose built wall. As you can see, the flue is offset, idealy we would have prefered a straight flue install, but due to the architects drawings, and that directly above is the middle of the master bedroom, it had to go here.

This is the flue passing through the wall, and going up through the second story floor. Later this was closed in with shelving.

Normally we would install the fire after the rooms are finished, but the customer wanted it in first. This is the flue passing through the upstairs walk in wardrobe.

The fire mounted onto its base.

Side view.

The exhaust is just visable to the left of the solar panels.

We left the plastic on the stainless steel fascia because there is a brick wall to be built around the fire to close the wall in, I have seen it, when it was completed, but I didn't have my camera. It looked awesome, and more important, the customer was very happy.

No comments:

Post a Comment